The MAKERX Air Brush can be the perfect tool for easy makeup, paint jobs, etc. Make sure to flush out any remaining solution completely. Follow the same bubbling procedure as described above. If your paint is not water-based, follow the manufacturer’s instructions regarding cleaning solutions. The spray gun should now be clean, dry, and ready to use later.ħ. Spray air through the nozzle until dry air comes out. Dump remaining water from the cup and wipe it dry. Check that the water is clean and clear.Ħ. Remove your finger from the nozzle and spray water through it.

Once the bubbles become thin and clear, the paint is mostly cleaned out.ĥ. Add clean water in the cup and repeat the bubbling operation several times. Let the air, water, and paint bubble up for a few seconds, then empty the cup. The water and paint will begin to bubble up in the cup.Ĥ. Gently push the trigger and pull it back. Place a finger over the nozzle to prevent liquid from coming out. While holding the compressor, turn on the Air Brush. Make sure the speed knob is turned to low on the hub. Open the tail screw for high liquid flow. Dump excess paint from the cup and wipe it out. Allowing paint to dry inside the nozzle can render the spray gun inoperable.ġ. When painting is concluded, clean the spray gun right away. Safe operation of your spray booth is critical to protecting you, your staff and anyone around it.Water-based paint is recommended. In addition, our spray hoods or walk-in spray booths can be utilized for HPLV (high-pressure, low velocity spray guns) spraying processes. In most cases, activated carbon filtration will work, however, we have the ability to impregnate the carbon as well for specialty paints.ĭIY Spray Booths can indeed be effective against harmful fumes and overspray if optimally built, however, there is a huge risk associated with not having a professionally made and manufactured Spray Booth for your application.Īt Sentry Air Systems, our unit utilizes a three-part filtration system consisting of a MERV 7 pre-filter (for overspray), a HEPA filter (for fine particulate), and an activated carbon filter for odors and VOC's in which is highly efficient and not offered with DIY projects. They can help determine what the optimal filtration should be. Yes, our application specialists will evaluate your process including the SDS (safety data sheet) for the paints that will be utilized. EPA air sampling)ĭo Portable Spray Booths work against VOCs?

No permitting issues for venting outside (ie.

Minimal installation costs-no external ducting or venting.

Portable paint shop pro 9